Command Section
UMASS(4)               FreeBSD Kernel Interfaces Manual               UMASS(4)

     umass - USB Mass Storage Devices driver

     To compile this driver into the kernel, place the following line in your
     kernel configuration file:

           device scbus
           device usb
           device umass

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):


     The umass driver provides support for Mass Storage devices that attach to
     the USB port.

     To use the umass driver, usb(4) and one of uhci(4) or ohci(4) or ehci(4)
     or xhci(4) must be configured in the kernel.  Additionally, since umass
     uses the SCSI subsystem and sometimes acts as a SCSI device, it requires
     da(4) and scbus(4) to be included in the kernel.

     The umass driver supports USB Mass Storage devices, including:

        ADTEC Stick Drive AD-UST32M, 64M, 128M, 256M
        Denno FireWire/USB2 Removable 2.5-inch HDD Case MIFU-25CB20
        FujiFilm Zip USB Drive ZDR100 USB A
        GREEN HOUSE USB Flash Memory "PicoDrive" GH-UFD32M, 64M, 128M
        Huawei Mobile (SD slot)
        IBM 32MB USB Memory Key (P/N 22P5296)
        IBM 256MB USB Drive (MSYSTEM DiskOnKey2)
        IBM ThinkPad USB Portable CD-ROM Drive (P/N 33L5151)
         iUH2 (CDROM, DVD-RAM only)
        I-O DATA USB x6 CD-RW Drive CDRW-i64/USB (CDROM only)
        I-O DATA USB/IEEE1394 Portable HD Drive HDP-i30P/CI, HDP-i40P/CI
        Iomega USB Zip 100/250 drive
        Iomega Zip750 USB2.0 drive
        Keian USB1.1/2.0 3.5-inch HDD Case KU350A
        Kurouto Shikou USB 2.5-inch HDD Case GAWAP2.5PS-USB2.0
        LaCie P3 HardDrive USB 200GB
        Logitec LDR-H443U2 DVD-RAM/-R/+R/-RW/+RW drive
        Logitec Mobile USB Memory LMC-256UD
        Logitec USB1.1/2.0 HDD Unit SHD-E60U2
        Logitec USB Double-Speed Floppy Drive LFD-31U2
        Logitec USB/IEEE1394 DVD-RAM/R/RW Unit LDR-N21FU2 (CDROM only)
        MELCO USB Flash Disk "ClipDrive", RUF-C32M, -C64M, -C128M, -C256M,
        MELCO USB Flash Disk "PetitDrive", RUF-32M, -64M, -128M, -256Mm
        MELCO USB2.0 Flash Disk "PetitDrive2", RUF-256M/U2, -512M/U2
        MELCO USB2.0 MO Drive MO-CH640U2
        Matshita CF-VFDU03 floppy drive
        Merlin SM300 MP3/WMA Player (256Mb)
        Microtech International, Inc. USB-SCSI-HD 50 USB to SCSI cable
        Motorola E398 Mobile Phone (TransFlash memory card)
        NOVAC USB2.0 2.5/3.5-inch HDD Case NV-HD351U
        PNY Attache Flash Drive
        Panasonic ("Matshita FDD CF-VFDU03")
        Panasonic KXL-CB20AN Portable DVD-ROM/CD-R/RW
        Panasonic KXL-CB35AN (DVD-ROM & CD-R/RW)
        Panasonic USB2.0 Portable CD-RW Drive KXL-RW40AN (CDROM only)
        Panasonic floppy drive
        Qware BeatZkey! Pro
        RATOC Systems USB2.0 Removable HDD Case U2-MDK1, U2-MDK1B
        SanDisk SDDR-31 (Compact Flash)
        SanDisk SDDR-75 (only Compact Flash port works)
        Sitecom CN-300 MultiFlash (MMC/SD, SmartMedia, CF, MemoryStick)
        Sony Portable CD-R/RW Drive CRX10U (CDROM only)
        TEAC Portable USB CD-ROM Unit CD-110PU/210PU
        Time DPA20B MP3 Player (1Gb)
        Trek Thumbdrive 8MB
        VAIO floppy drive (includes Y-E Data Flashbuster-U)
        Y-E Data floppy drive (720/1.44/2.88Mb)

     Among the supported digital cameras are:

        Asahi Optical (PENTAX) Optio 230 & 330

           device umass
           device scbus
           device da
           device pass

     Add the umass driver to the kernel.

           camcontrol rescan 0

     Rescan a Zip drive that was added after boot.  The command above assumes
     that the Zip drive is on the first SCSI bus in the system.

           camcontrol rescan 0:0:0
           camcontrol rescan 0:0:1
           camcontrol rescan 0:0:2
           camcontrol rescan 0:0:3

     Rescan all slots on a multi-slot flash reader, where the slots map to
     separate LUNs on a single SCSI ID.  Typically only the first slot will be
     enabled at boot time.  Again, this assumes that the flash reader is the
     first SCSI bus in the system.

           bsdlabel -w da0 zip100
           newfs da0c
           mount -t ufs /dev/da0c /mnt

     Write a disklabel to the Zip drive (see vpo(4) for the disktab(5) entry),
     creates the file system and mounts the new file system on /mnt.

           newfs_msdos /dev/da0

     Create a new FAT type file system.  Care should be taken not to run
     newfs(8) on devices that already contain data, as this will result in the
     information being lost.

     Many consumer devices such as digital cameras automatically create MS-DOS
     based file systems when storing information such as images and videos.
     These file systems can be accessed by specifying the file system type as
     msdosfs when using mount(8).

     cfumass(4), ehci(4), ohci(4), uhci(4), usb(4), vpo(4), xhci(4),
     disktab(5), bsdlabel(8), camcontrol(8)

     The umass driver was written by MAEKAWA Masahide <[email protected]>
     and Nick Hibma <n_[email protected]>.

     This manual page was written by Nick Hibma <n_[email protected]>.

FreeBSD 11.1-RELEASE-p4         April 19, 2014         FreeBSD 11.1-RELEASE-p4
Command Section