Man

Command Section
UCYCOM(4)              FreeBSD Kernel Interfaces Manual              UCYCOM(4)

NAME
     ucycom - device driver for Cypress CY7C63743 and CY7C64013 USB to RS232
     bridges

SYNOPSIS
     To compile this driver into the kernel, place the following line in your
     kernel configuration file:

           device usb
           device ucom
           device ucycom

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

           ucycom_load="YES"

DESCRIPTION
     The ucycom driver provides support for the Cypress CY7C63743 and
     CY7C64013 bridge chips.  These chips were designed to provide a low-cost
     transition path to USB for existing RS232 devices, and have fairly
     limited capabilities.

     The ucycom driver behaves like a tty(4).

HARDWARE
     The ucycom driver currently supports the following devices which
     incorporate Cypress USB to RS232 bridge chips:

        DeLorme Earthmate USB GPS receiver

FILES
     /dev/ttyU*       for callin ports
     /dev/ttyU*.init
     /dev/ttyU*.lock  corresponding callin initial-state and lock-state
                      devices

     /dev/cuaU*       for callout ports
     /dev/cuaU*.init
     /dev/cuaU*.lock  corresponding callout initial-state and lock-state
                      devices

SEE ALSO
     tty(4), ucom(4), usb(4)

HISTORY
     The ucycom driver first appeared in FreeBSD 5.3.

AUTHORS
     The ucycom driver and this manual page were written by Dag-Erling
     Sm/rgrav <[email protected]>.

FreeBSD 11.1-RELEASE-p4         April 26, 2017         FreeBSD 11.1-RELEASE-p4
Command Section