Command Section
LIBGEOM(3)             FreeBSD Library Functions Manual             LIBGEOM(3)

     geom_stats_open, geom_stats_close, geom_stats_resync,
     geom_stats_snapshot_get, geom_stats_snapshot_free,
     geom_stats_snapshot_timestamp, geom_stats_snapshot_reset,
     geom_stats_snapshot_next, gctl_get_handle, gctl_ro_param, gctl_rw_param,
     gctl_issue, gctl_free, gctl_dump, g_open, g_close, g_mediasize,
     g_sectorsize, g_stripeoffset, g_stripesize, g_flush, g_delete,
     g_device_path, g_get_ident, g_get_name, g_open_by_ident, g_providername -
     userland API library for kernel GEOM subsystem

     Userland API Library for Kernel GEOM subsystem (libgeom, -lgeom)

     /* stdio.h is only required for `gctl_dump` */
     #include <stdio.h>
     #include <libgeom.h>

   Statistics Functions



     void *

     geom_stats_snapshot_free(void *arg);

     geom_stats_snapshot_timestamp(void *arg, struct timespec *tp);

     geom_stats_snapshot_reset(void *arg);

     struct devstat *
     geom_stats_snapshot_next(void *arg);

   Control Functions
     struct gctl_req *

     gctl_ro_param(struct gctl_req *req, const char *name, int len,
         const void *value);

     gctl_rw_param(struct gctl_req *req, const char *name, int len,
         void *value);

     const char *
     gctl_issue(struct gctl_req *req);

     gctl_free(struct gctl_req *req);

     gctl_dump(struct gctl_req *req, FILE *f);

   Utility Functions
     g_open(const char *name, int dowrite);

     g_close(int fd);

     g_mediasize(int fd);

     g_sectorsize(int fd);

     g_stripeoffset(int fd);

     g_stripesize(int fd);

     g_flush(int fd);

     g_delete(int fd, off_t offset, off_t length);

     char *
     g_device_path(const char *devpath);

     g_get_ident(int fd, char *ident, size_t size);

     g_get_name(const char *ident, char *name, size_t size);

     g_open_by_ident(const char *ident, int dowrite, char *name, size_t size);

     char *
     g_providername(int fd);

     The geom library contains the official and publicized API for interacting
     with the GEOM subsystem in the kernel.

   Statistics Functions
     GEOM collects statistics data for all consumers and providers, but does
     not perform any normalization or presentation on the raw data, this is
     left as an exercise for user-land presentation utilities.

     The geom_stats_open() and geom_stats_close() functions open and close the
     necessary pathways to access the raw statistics information in the
     kernel.  These functions are likely to open one or more files and cache
     the file descriptors locally.  The geom_stats_open() function returns
     zero on success, and sets errno if not.

     The geom_stats_resync() function will check if more statistics collection
     points have been added in the kernel since geom_stats_open() or the
     previous call to geom_stats_resync().

     The geom_stats_snapshot_get() function will acquire a snapshot of the raw
     data from the kernel, and while a reasonable effort is made to make this
     snapshot as atomic and consistent as possible, no guarantee is given that
     it will actually be so.  The snapshot must be freed again using the
     geom_stats_snapshot_free() function.  The geom_stats_snapshot_get()
     function returns NULL on failure.

     The geom_stats_snapshot_timestamp() function provides access to the
     timestamp acquired in the snapshot.

     The geom_stats_snapshot_reset() and geom_stats_snapshot_next() functions
     provide an iterator over the statistics slots in the snapshot.  The
     geom_stats_snapshot_reset() function forces the internal pointer in the
     snapshot back to before the first item.  The geom_stats_snapshot_next()
     function returns the next item, and NULL if there are no more items in
     the snapshot.

   Control Functions
     The gctl_*() functions are used to send requests to GEOM classes.  In
     order for a GEOM class to actually be able to receive these requests, it
     must have defined a "ctlreq" method.

     A struct gctl_req *, obtained with gctl_get_handle(), can hold any number
     of parameters, which must be added to it with gctl_ro_param() (for read-
     only parameters) or gctl_rw_param() (for read/write parameters).

     Both gctl_ro_param() and gctl_rw_param() take a string name, which is
     used to identify the parameter, and a value, which contains, in the read-
     only case, the data to be passed to the GEOM class, or, in the read/write
     case, a pointer to preallocated memory that the GEOM class should fill
     with the desired data.  If len is negative, it is assumed that value is
     an ASCII string and the actual length is taken from the string length of
     value; otherwise it must hold the size of value.

     A parameter with a name containing the string "class" is mandatory for
     each request, and the corresponding value must hold the name of the GEOM
     class where the request should be sent to.

     Also mandatory for each request is a parameter with a name called "verb",
     and the corresponding value needs to hold the command string that the
     GEOM class should react upon.

     Once all desired parameters are filled in, the request must be sent to
     the GEOM subsystem with gctl_issue(), which returns NULL on success, or a
     string containing the error message on failure.

     After the request is finished, the allocated memory should be released
     with gctl_free().

     The gctl_dump() function can be used to format the contents of req to the
     open file handle pointed to by f, for debugging purposes.

     Error handling for the control functions is postponed until the call to
     gctl_issue(), which returns NULL on success, or an error message
     corresponding to the first error which happened.

   Utility Functions
     The g_*() functions are used to communicate with GEOM providers.

     The g_open() function opens the given provider and returns file
     descriptor number, which can be used with other functions.  The dowrite
     argument indicates if operations that modify the provider (like g_flush()
     or g_delete()) are going to be called.

     The g_close() function closes the provider.

     The g_mediasize() function returns size of the given provider.

     The g_sectorsize() function returns sector size of the given provider.

     The g_stripeoffset() function returns stripe offset of the given

     The g_stripesize() function returns stripe size of the given provider.

     The g_flush() function sends BIO_FLUSH request to flush write cache of
     the provider.

     The g_delete() function tells the provider that the given data range is
     no longer used.

     The g_device_path() function returns the full path to a provider given a
     partial or full path to the device node.  NULL is returned if the device
     cannot be found or is not a valid geom provider.

     The g_get_ident() function returns provider's fixed and unique
     identifier.  The ident argument should be at least DISK_IDENT_SIZE big.

     The g_get_name() function returns name of the provider, which identifier
     is equal to the ident string.

     The g_open_by_ident() function opens provider using its identification,
     unlike g_open() which uses the provider's name.  The function will store
     the provider's name in the name parameter if it is not NULL.

     The g_providername() function returns the provider name of an open file
     descriptor.  NULL is returned the file descriptor does not point to a
     valid geom provider.

     All functions except g_providername() and g_device_path() return a value
     greater than or equal to 0 on success or -1 on failure.

     Create a request that is to be sent to the CCD class, and tell it to
     destroy a specific geom:

           H = gctl_get_handle();
           gctl_ro_param(H, "verb", -1, "destroy geom");
           gctl_ro_param(H, "class", -1, "CCD");
           sprintf(buf, "ccd%d", ccd);
           gctl_ro_param(H, "geom", -1, buf);
           errstr = gctl_issue(H);
           if (errstr != NULL)
               err(1, "could not destroy ccd: %s", errstr);

     The geom library appeared in FreeBSD 5.1.

     Poul-Henning Kamp <[email protected]>
     Lukas Ertl <[email protected]>
     Pawel Jakub Dawidek <[email protected]>

FreeBSD 11.1-RELEASE-p4         April 22, 2017         FreeBSD 11.1-RELEASE-p4
Command Section